JVC KW-V21BT - SETTINGS; Sound Adjustment and Equalizer Settings; Storing Custom Sound Adjustments

ENGLISH 31
SETTINGSSETTINGS
Sound adjustment
R Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV
• You cannot adjust the sound when the AV source
is turned off .
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the Home screen:
2 Select a sound mode.
• You can change the page to display more
items by pressing [ J]/[ K].
Storing your own adjustment—Customizing
preset sound mode
1 Select a sound mode. (See the left column.)
2 Adjust the level of each band (1), then
select the subwoofer level (2).
The adjustments are stored and <User> is
activated.
Storing your own adjustment— Adjusting the
sound precisely
1 Select a sound mode. (See the left column.)
2 Display the adjustment screen.
3 Select a band.
4 Adjust the sound.
[Reset] Changes level of all bands to 0.
<Freq> Selects frequency.
<Q> Adjusts the width of the
frequency.
<SW Level> Adjusts subwoofer level.*
The adjustments are overwritten if the <User>
setting has been created (see the left column),
and <User> is activated.
• The adjustments are memorized until you adjust
sound again.
• To make adjustment for other bands, repeat steps
3 and 4.
* Adjustable only when the subwoofer is activated. (Page37)
KW-VEntryU.indb31KW-VEntryU.indb31 2014/09/1019:502014/09/1019:50