EasyManuals Logo

JVC KW-V255DBT User Manual

JVC KW-V255DBT
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Digital Radio (DAB)Digital Radio (DAB)
Operation keys on source control screen
The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
See also “Common operation keys on source control
screen” on page7.
Touching the operation keys performs the following
actions:
7
[PTY]* (For RDS features)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to search
for.
If there is a service broadcasting a
program of the same PTY code as you
have selected, that service is tuned in.
[SEEK]
Changes the seek mode for [
S]/[T].
AUTO1 (Initial): Auto search
AUTO2: Tunes in preset services one
after another
MANU: Manual search
* Only English/Spanish/French/German/Dutch/Portuguese are
available for the text language here. If another language has been
selected in <Language> (Page 36), the text language is set
to English.
[TI] (For RDS features)
Activates TI standby reception mode.
When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
If the TI indicator lights up in orange,
tune into another service providing
Radio Data System signals.
The volume adjustment for Traffic
Information is automatically
memorized. The next time the unit
switches to Traffic Information, the
volume is set to the memorized level.
The TI Standby Reception can also be
activated or deactivated from “Tuner”
source control screen. (Page 16)
To deactivate, touch [TI] again.
[MODE] Changes the settings for DAB reception
on the <DAB Mode> screen.
9
[ ]
Displays the <Service List> screen.
[
S]/[T]
Searches for a service.
The search method differs depending
on the selected seek mode.
[DLS] Displays Dynamic Label Segment Screen
(text messages the service sends).
Selecting a service on the list
You can obtain information on service or select a
service to listen to.
1 Display the <Service List> screen.
On the source control screen, touch as follows:
2 Select a service from the list.
• Touch [A–Z] to display the <A–Z Search>
screen. Then, select the initial to start searching.
To search with non-alphabetical characters, touch
[#].
Touch and hold [ ] to update the service list.
19
ENGLISH
00_KWV_2019ST_EQ_EN.indb 1900_KWV_2019ST_EQ_EN.indb 19 29/6/2018 11:57:01 AM29/6/2018 11:57:01 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KW-V255DBT and is the answer not in the manual?

JVC KW-V255DBT Specifications

General IconGeneral
BrandJVC
ModelKW-V255DBT
CategoryCar Receiver
LanguageEnglish

Related product manuals