JVC KW-V330BT - Page 38

38
TUNERTUNER
KW-V330BT:
1 Select the band (1), then display the
preset station window (2).
• You can also select a preset station by
pressing [P1] – [P5].
2 Select a preset station.
• Pressing [<] scrolls the text if not all of the text
is shown.
• To close the window list, press [
].
FM RBDS features
❏ Searching for FM RBDS programs—PTY
Search
You can search for your favorite programs being
broadcast by selecting the PTY code.
1
2 Select a PTY code.
(Hold)
• You can change the page to display more
items by pressing [
]/[ ].
PTY Search starts.
If there is a station broadcasting a program of
the same PTY code as you have selected, that
station is tuned in.
❏ Activating/deactivating TI Standby
Reception
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station providing RBDS signals.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
2017KW-VEntryK.indb382017KW-VEntryK.indb38 2016/12/0915:112016/12/0915:11