JVC KW-V330BT - Adjustment for Video Playback

ENGLISH 65
SETTINGSSETTINGS
Adjustment for video playback
❏ Adjusting the picture
You can adjust the picture quality.
1 Display the picture adjustment screen.
On the source control screen:
2 Select [DIM ON] (dimmer on) or [DIM OFF]
(dimmer off) (1), then adjust the picture
(2).
<Bright> Adjusts the brightness. (−15
to +15)
<Contrast> Adjusts the contrast. (−10 to
+10)
<Black> Adjusts the blackness. (−10 to
+10)
<Color> Adjusts the color. (−10 to +10)
<Tint>
Adjusts the tint. (−10 to +10)
<Sharpness> Adjusts the sharpness. (−2 to
+2)
• You can also display the <Equalizer> screen
as follows:
– For KW-V230BT : Select [ Screen
Adjustment] on the pop-up short-cut
menu (Page12).
– For KW-V330BT /KW-V430BT /KW-V630BT :
Select [
] on the pop-up short-cut menu
(Page12).
❏ Changing the aspect ratio
You can change the aspect ratio for video playback.
1 Display the aspect ratio selection screen.
On the source control screen:
2 Select the aspect ratio.
<Full>* For 16:9 original pictures
4:3 signal 16:9 signal
<Just> For viewing 4:3 pictures
naturally on the wide screen
4:3 signal 16:9 signal
<Normal>* For 4:3 original pictures
4:3 signal 16:9 signal
<Auto> For “DISC”/“USB” only: The
aspect ratio is automatically
selected to match the incoming
signals.
* While DivX is played back with <Screen Ratio> set to [16:9]
(Page 18 for discs/Page 20 for USB), the aspect ratio may not
set correctly.
2017KW-VEntryK.indb652017KW-VEntryK.indb65 2016/12/0915:112016/12/0915:11