JVC KW-V330BT - Page 40

40
SiriusXM® Satellite Radio SiriusXM® Satellite Radio
❏ Operation buttons on the source
control screen
• To display all available operation buttons, press
[ ]/[ ]*
1
.All the other available buttons are
shown.
– To hide the window, press [ ]/[ ] *
1
.
[SXM1] –
[SXM4]
Selects the band.
[ ]
Displays the preset channel
window. (See the far right column.)
• To hide the window, press [
].
[Song Title]/
[Info]/
[Category]
Changes the displayed information
each time this button is pressed.
[FNC J]*
2
Displays the pop-up short-cut
menu. (Page12)
• To close the menu, press [K].
[
]*
3
Displays the Home screen.
[
]
Displays the <Channel List>
screen. (Page41)
[I/W]/[IW]*
1
Starts/pauses the content replay.
(Page 42)
[CHK]/[CHJ]
Selects the channel.
[MODE] Changes the settings for SiriusXM
Satellite Radio reception on
the <SiriusXM Mode> screen.
(Pages42–47)
[
]
Registers the current artist to the
alert contents. (Page43)
[
]
Registers the current song to the
alert contents. (Page43)
[
]
Activates/ deactivates the content
alert for traffic and weather.
(Page45)
[SEEK] Changes the seek mode.
• SEEK1: Skip to another available
channel.
• SEEK2: Skip to another preset
channel.
[SCAN] Starts TuneScan™. (Page43)
[S]/[T]/
[Live]
Used while replaying content.
(Page42)
[
]
Changes the page of the operation
button window to display other
operation buttons.
*
1
The appearance of the buttons/indicators differs depending on the
model.
*
2
Appears only for KW-V330BT.
*
3
Appears only for KW-V430BT.
Presetting channels
❏ Storing channels in the memory
You can preset 5 channels for each band.
1 Tune in to a channel you want to preset.
(See the left column.)
2 Select a preset number.
(Hold)
The channel selected in step 1 is stored.
❏ Selecting a preset channel
1 Select the band (1), then display the
preset channel window (2).
• You can also select a preset channel by
pressing [P1] – [P5].
2 Select a preset channel.
• Pressing [ < ] scrolls the text if not all of the
text is shown.
• To close the window list, press [ ] .
3 Select “SEEK2” as the seek mode to jump
to the selected preset channel.
2017KW-VEntryK.indb402017KW-VEntryK.indb40 2016/12/0915:112016/12/0915:11