JVC KW-V330BT - Page 72

72
SETTINGSSETTINGS
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC/
FLAC.) The volume level will automatically increase
or decrease when you change the source.
• –15 to +6 (Initial: 00)
❏ <Display> setting screen
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– The ILLUMI lead connection is required.
(Pages79 and 80 )
• ON: Activates dimmer.
• OFF: Cancels.
<User Customize>
Change the display design. (Page66)
<OSD Clock>
• ON: Displays the clock while a video source is
playing.
• OFF (Initial): Cancels.
<Demonstration>
• ON (Initial): Activates the demonstration on the
screen.
• OFF: Cancels.
<Scroll>
• ON: Scrolls the displayed information repeatedly.
• Once (Initial): Scrolls the displayed information
once.
• OFF: Cancels.
Pressing [H] scrolls the text regardless of this setting.
<Home Customize>*
1
Change the items to display on the Home screen.
(Page68)
<Screen Adjustment>
Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select
[DIM ON] (dimmer on)/[DIM OFF] (dimmer off),
then change the following settings:
• Bright: Adjusts brightness.
– –15 to +15 (Initial: 0 for dimmer on/+15 for
dimmer off)
• Black: Adjusts blackness.
– –10 to +10 (Initial: 0)
<Video Output>*
2
Select the color system of the external monitor.
• NTSC (Initial)/PAL
<Viewing Angle>
Select the viewing angle in relation to the monitor
panel to make the panel easier to see.
• Under 0° (Initial)/5°/10°/15°/20°
*
1
Only for KW-V230BT .
*
2
“Please Power Off” appears when the setting is changed. Turn off
the power, then turn on to enable the change.
❏ <Input> setting screen
<Rear Camera>
Configure the rear view camera settings.
• Rear Camera Interruption(Page48):
– ON (Initial): Displays the picture from the rear
view camera when you shift the gear to the
reverse (R) position.
– OFF: Select this when no camera is connected.
• Parking Guidelines: Displays (ON: Initial) or hides
(OFF) the parking guidelines. (Page49)
• Guidelines Setup: Adjusts the parking guidelines.
(Page49)
<Parking Assist>*
1
Configure settings for using the ADS adapter.
• Parking Assist Display: When an ADS adapter
is connected, you can display information about
obstacles around the car.
– ON: Always displays information.
– Dyn. (Initial): Displays information when the
sensor detects obstacles.
– OFF: Cancels.
• Parking Assist Position: Selects where
information about obstacles is displayed on the
screen
– Left/Right (Initial)
<Navigation Input>*
2
• iPhone: Switches to the APP screen from the
connected iPod touch/iPhone by pressing on
the monitor panel (for KW-V230BT /KW-V330BT )
or [ ] on the pop-up short-cut menu (for
KW-V430BT /KW-V630BT). (Page27)
• OFF: Switches to the current source control
screen.
<TV Tuner Control>*
3
• ON: Enables to control TV operation on the
“AV-IN”.
• OFF (Initial): Select this to use “AV-IN” with the
other component than TV Tuner.
*
1
Only for KW-V330BT Region 1/KW-V430BT.
*
2
To change the setting, turn off the AV source by pressing [AV Off]
on the Home screen beforehand.
*
3
Only for KW-V430BT /KW-V630BT .
2017KW-VEntryK.indb722017KW-VEntryK.indb72 2016/12/0915:112016/12/0915:11