JVC KW-V50BT - Page 25

ENGLISH 25
TUNER
R Tuning in FM stations only with strong
signals—LO/DX (Local/Distance-
extreme)
1
2
[Local] Select this to tune in only to stations
with sufficient signal strength. The
LO indicator lights up.
[DX] Deactivate the function. The DX
indicator lights up.
R Reducing interference during FM
reception
1
2
[Auto] Increases the tuner selectivity
to reduce interference between
adjacent stations. (Stereo effect may
be lost.)
[Wide] Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will remain.
R Changing the tuner channel interval
The tuner channel interval changes depending on
the area you use this unit.
1
2
[US] Select this when using in North/
Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
[Europe] Select this when using in any other
areas. FM/AM intervals are set to 50
kHz/9 kHz.
[SA] Select this when using in South
American countries where FM
interval is 50 kHz. AM interval is set
to 10 kHz.
• The initial setting is <US> for KW-V50BT
Region 1/KW-V30BT Region 1, and <SA> for
KW-V50BT Region 4/KW-V30BT Region 4.