JVC KW-V50BT - Customizing the Home Screen; Customizing the System Settings

48
SETTINGS
neercs emoH eht gnizimotsuC
You can arrange the items to display on the Home
screen.
1 Display the <Menu Customize> screen.
On the Home screen:
Press and hold the icon you want to replace.
(Hold)
2 Select the item you want to display on the
position selected in step 1 (1), then press
[HOME].
t Repeat the procedure to place icons for other
items.
Customizing the system settings
R sgnittes eht gnillacer/gniziromeM
You can memorize the following settings:
t Settings on the <Settings> screen: Fader/
Balance, Equalizer, Loudness, Crossover
(<HPF>/<LPF>/<SW Level> settings), Volume
Adjust, Speaker Select, Display Design
t Settings for “AV-IN”: AV-IN Name
On the Home screen:
t Press [K] repeatedly to change the page on the
<System> menu screen.
[Recall] Recalls the memorized settings.
[Save] Memorizes current settings.
[Delete] Deletes the memorized settings.
A conrmation message appears. Press [Yes].
R noitisop hcuot eht gnitsujdA
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Touch Panel Adjust> screen.
On the Home screen:
t Press [K] repeatedly to change the page on
the <System> menu screen.
2 Touch the center of the marks at the lower
left and at the upper right as instructed.
t To reset the touch position, press [Reset].
t To cancel the current operation, press
[Cancel].