JVC KW-V50BT - SETTINGS

ENGLISH 43
SETTINGS
fo snoitacilppa gnisu rof sgnitteS
the iPod/iPhone/Android
Before using applications of the iPod/iPhone/
Android such as Pandora and iHeartRADIO, select
the device to use and connection method.
1 Pair the iPod/iPhone/Android device
2 Display the <App Settings> screen.
On the Home screen:
t If [Enter] for <App Setup> cannot be
3
4 Check the current device status, then press
[Change].
t If you do not need to change the setting,
press [OK] to exit from the setup screen.
5 Select the device type (1), then press
[Next] (2).
6 Select the connection method (1), then
press [Next] (2).
For Android:
<HDMI/MHL
+ Bluetooth>
Select this when the Android
is connected both by cable to
HDMI/MHL input terminal and
via Bluetooth.
<Bluetooth> Select this when the device is
connected via Bluetooth.
For iPod/iPhone:
<USB +
AV-IN>
Select this when the iPod/
iPhone is connected using KS-
U59 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using USB
2.0 cable (accessory of the iPod/
iPhone).
<HDMI +
Bluetooth>
Select this when the iPod/
iPhone is connected using
HDMI cable KS-U60 (optional
accessory) and USB 2.0 cable
(accessory of the iPod/iPhone)
through Lightning-Digital AV
adapter (accessory of the iPod/
iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
t When selecting <USB + AV-IN> or <USB 1
wire>, go to step 8.
7 When selecting <HDMI + Bluetooth> or
<Bluetooth> as the connection method,
paired device list appears. Select the target
device.
t If desired device is not listed, press [Search]
for searching the available iPod/iPhone
devices, then select the target device from the
<Available Devices> screen.
– You can change the page to display more
items by pressing [J]/[K].
– To stop searching, press [Cancel].
8 Conrm the settings.