JVC KW-V50BT - Using the Bluetooth mobile phone

38
BLUETOOTH
Using the Bluetooth mobile phone
R Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page33)
To reject a call
When <Auto Answer> is set to [On] (Page42)
The unit answers the incoming call automatically.
R Ending a call
While talking...
R Adjusting the volume of calls/earpiece/
microphone
While talking...
• You can adjust the volume level between 0 to 15
(initial: 3).
• This adjustment does not affect the volume level
of the other sources.
• Use the monitor panel to adjust the call/earpiece
volume. (Page6)
R Switching between handsfree mode
and phone mode
While talking...
Each time you press the button, the talking method
is switched (
: handsfree mode / :
phone mode).
R Reducing noise/adjusting the echo
cancel level
While talking...
• To adjust the echo volume (between −1 to +1,
initial: 0): Adjust <EC LEVEL>.
• To adjust the noise reduction volume (between
0 to −20, initial: −10) : Adjust <NR LEVEL>.