EasyManua.ls Logo

JVC KW-V50BT - Updating the system

JVC KW-V50BT
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH 49
SETTINGS
R metsys eht gnitadpU
You can update the system by connecting a USB
device containing an update le.
t To update the system, visit <http://www.jvc.net/
cs/car/>.
1 Create an update le, copy it to a USB
device, and connect it to the unit.
2 Display the <System Information>
screen.
On the Home screen:
t Press [K] repeatedly to change the page on
the <System> menu screen.
3
<Application
Version>
Updates the system
application.
<Bluetooth
Version>
Updates the Bluetooth
application.
<System Version> Updates the system.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
t To nish the procedure, press [
].
t If the update has failed, turn the power o and
then on, and retry the update.
t Even if you have turned o the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
smeti unem gnitteS
R Displaying the <Setup> menu screen
R <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
t F6 to R6 (Initial: 0)
When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
t L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
] to adjust.
To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
t Flat (Initial)/Natural/Dynamic/Vocal Boost/Bass
Boost/Vibrant/User
<Loudness>
You can activate/deactivate loudness.
t On (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
t O: Cancels.
<Crossover>
<Volume Adjust>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.)
The volume level will automatically increase or
decrease when you change the source.
t –15 to +6 (Initial: 00)
>tceleS rekaepS<
Select the size of the connected speaker.
t Standard (Initial)/Narrow/Middle/Wide

Related product manuals