JVC KW-V50BT - Page 36

36
BLUETOOTH
ecived tegrat eht morf ecived htooteulB a gniriaP
using a PIN code (for Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the Home screen:
t You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
2 Change the PIN code.
t If you skip changing the PIN code, go to step
3.
t The PIN code is initially set to “0000”.
t The maximum number of digits in the PIN
code is 15.
t Press [Clear] to delete the last entry.
3 Search the unit (“KW-V****”) from your
Bluetooth device.
4 Select the unit (“KW-V****”) for your
Bluetooth device.
t If the PIN code is required, enter “0000”
(initial).
When pairing is complete, the device is listed on
<Paired Device List>.
t To use the paired device, connect the device
on <Paired Device List>