6
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1, FM2, FM3 or
AM).
Note:
This receiver has three FM bands (FM1, FM2,
and FM3). You can use any one of them to listen
to an FM broadcast.
2
Start searching for a station.
To search for stations of higher
frequencies, press ¢
briefly.
To search for stations of lower
frequencies, press 4
briefly.
When a station is received, searching stops.
ST indicator lights up when receiving an FM
broadcast in stereo.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching for a station manually:
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
2
Press and hold ¢ or 4
until “M” (manual) starts flashing on
the display.
3
Tune in to a station you want while
“M” is flashing.
To tune in to stations of higher
frequencies
To tune in to stations of lower
frequencies
Selected band appears.
ENGLISH
To Next Page
Loading...
