JVC KW-XG70HM - Bluetooth Cellular Phone Usage; Handling Incoming Calls and Messages; Ending a Bluetooth Call

ENGLISH
14
When a call comes in....
The source is automatically changed to “BT-PHONE.”
When “AUTO ANS” (answer) is activated....
The unit answers the incoming calls automatically, see
page 26.
• When “AUTO ANS” (answer) is deactivated, press any
button (except /control dial/0) to answer
the incoming call.
To end the call
Hold any button (except /control dial/0).
• You can adjust the microphone volume level (see
page 26).
When a text message comes in....
If the cellular phone is compatible with text message
and “MSG INFO” (message info) is set to “AUTO” (see
page 26), the unit rings and “RCV MSG” (receiving
message) appears on the display to inform you the
arrival of the message.
Using the Bluetooth cellular phone
~
Select “BT-PHONE.”
Ÿ Enter Bluetooth menu.
! Make a call or settings using the Bluetooth menu. (See pages 15 and 26.)
Return to the device list menu
EN14-21_KW-XG70HM_f.indd 14EN14-21_KW-XG70HM_f.indd 14 8/5/09 4:54:35 PM8/5/09 4:54:35 PM