JVC KW-XG70HM - Basic Operations; Control Panel Operations; Remote Controller Usage

ENGLISH
5OPERATIONS
Basic operations
Using the control panel
1 • Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
2 Loading slot
3 • Enter the PSM settings [Hold].
• Adjust the sound mode.
4 Display window
5 Select the source.
FM/AM = CD * = USB * = CD-CH */IPOD *
(or EXT IN) = BT-PHONE * (Bluetooth Phone)
= BT-AUDIO * (Bluetooth Audio) = AUX IN =
(back to the beginning)
* You cannot select these sources if they are not
ready or not connected.
6 Eject disc.
7 Select the bands.
8 Reset button
9 • FM/AM: Select preset station.
• CD/USB/CD-CH: Select folder/track/disc (for CD
changer).
• BT-PHONE: Select preset phone number.
p • FM/AM: Select preset station.
• CD/USB/CD-CH: Select folder.
• IPOD: Enter the main menu/Pause playback/
Confirm selection.
• BT-PHONE/BT-AUDIO: Enter setting menu/
Confirm selection.
q • FM/AM: Search for station.
• CD/USB/CD-CH: Select track.
• IPOD: Select track.
• BT-PHONE/BT-AUDIO: Select setting item/
Select a registered device.
w Enter functions mode.
Press MODE, then one of the following buttons
(within 5 seconds)...
MO : Turn on/off monaural reception.
SSM : Automatic station presetting [Hold].
RPT : Select repeat play.
RND : Select random play.
5 / ∞ : Skip 10 tracks.
e Volume control [Turn].
• Press to extend the protrusion to adjust the
volume.
• Press again to shorten the protrusion when not
in used. (There is no operation for pressing the
control dial.)
r Select the sound mode.
t USB (Universal Serial Bus) input terminal
y AUX (auxiliary) input jack
u Change the display information.
EN02-07_KW-XG70HM_f.indd 5EN02-07_KW-XG70HM_f.indd 5 8/5/09 4:55:11 PM8/5/09 4:55:11 PM