What to do if the USB port is drawing more power than the design limit on my JVC Car Receiver?
If the USB port on your JVC Car Receiver is drawing more power than the design limit: 1. Turn the power off and unplug the USB device. Then, turn the power on and reattach the USB device. 2. If the problem persists, turn the power off and on (or reset the unit) before replacing with another USB device.
How to eject a disc from my JVC Car Receiver when it's stuck?
If you're unable to eject a disc from your JVC Car Receiver, press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected.
Why does my JVC Car Receiver say “CANNOT PLAY”?
If your JVC Car Receiver displays “CANNOT PLAY”, connect a USB device that contains playable audio files.
What to do if pairing cannot be made with my JVC Car Receiver?
If you are unable to pair your device with the JVC Car Receiver, make sure you have entered the same PIN code on both the unit and the Bluetooth device. If it still fails, delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
Why can't I playback at [AUTO MODE] on my JVC Car Receiver?
If you cannot playback in [AUTO MODE] on your JVC Car Receiver: 1. Make sure the JVC MUSIC PLAY APP is installed on the Android device. 2. Reconnect the Android device and select the appropriate control mode. 3. If the problem persists, the connected Android device does not support [AUTO MODE].
What does “STATION LMT” The number of registered stations has reached its limit mean on my JVC Car Receiver?
If your JVC Car Receiver displays “STATION LMT” The number of registered stations has reached its limit, retry after deleting unnecessary stations from your device.
What to do if my JVC Car Receiver displays “NO DEVICE” or “READING” keeps flashing when using an Android device?
If your JVC Car Receiver displays “NO DEVICE” or “READING” keeps flashing when using an Android device, try switching off the developer options on the Android device. If that doesn't work, reconnect the Android device. If the problem persists, the connected Android device may not support [AUTO MODE].
Why is the phone sound quality poor on my JVC Car Receiver?
If the phone sound quality is poor when using your JVC Car Receiver, reduce the distance between the unit and the Bluetooth device. Additionally, move the car to a place where you can get better signal reception.
Why does my JVC Car Receiver say “UNSUPPORTED DEVICE”?
If your JVC Car Receiver displays “UNSUPPORTED DEVICE”, check whether the connected device is compatible with this unit and ensure the file systems are in supported formats.
Why is the radio reception poor on my JVC Car Receiver?
If you are experiencing poor radio reception with your JVC Car Receiver, make sure the antenna is firmly connected.
Key instructions for safe operation, battery handling, and general care.
Guide to understanding the manual's structure and references.
Explanation of the faceplate and remote control components and their functions.
How to turn on/off, adjust volume, select sources, and change display.
Procedures for resetting the unit and replacing the remote control battery.
Guide to canceling demonstration, setting clock/date, and basic system configurations.
Detailed configuration for system options and enabling/disabling sources.
Details on firmware updates, factory reset, clock, and language settings.
How to search for radio stations using auto/manual methods.
Procedure for saving preset radio stations.
How to access and listen to saved radio stations.
Explanation of various tuner settings like Radio Timer, SSM, and Local Seek.
Details on settings like IF Band, Mono Set, News Set, Regional, AF Set, TI, PTY Search.
List of program type codes for station searching.
Steps to connect and play audio from a portable device via the AUX input.
How to start playback and select sources like CD, USB, iPod/iPod, and Android.
Detailed operations for track selection, repeat play, and random play for various media types.
How to select control modes for iPod and Android devices.
Steps for selecting files, quick search, and alphabet search.
Guide to preparing and using the JVC Remote application.
Preparation steps, connecting the device, and starting playback.
Creating, storing, searching stations, and bookmarking songs.
Preparation and starting playback for Spotify.
Controls for playback, saving favorites, and searching for songs/stations.
Steps for pairing and connecting a Bluetooth device for the first time.
Overview of supported profiles, codecs, and microphone connection.
Managing incoming calls, auto-pairing, and call handling.
Handling multiple calls, adjusting volume, improving voice quality, and call receiving settings.
Procedures for making calls via call history, phonebook, voice recognition, and memory.
How to store contacts in memory and make calls from them.
Configuring connection modes, device management, PIN code, and auto pairing.
Procedure to verify Bluetooth device compatibility with the unit.
How to listen to audio from connected Bluetooth devices.
Using playback controls, group selection, and file navigation for Bluetooth audio.
Setup and usage of the JVC Remote application for controlling the car receiver.
How to stream audio from iPhone/iPod, internet radio, Pandora, and Spotify via Bluetooth.
Selecting preset equalizers and storing custom sound settings.
Accessing and configuring various other audio settings.
Detailed settings for EQ, frequency bands, Q factor, and audio controls.
Adjusting subwoofer levels, fader, balance, and gain settings.
Configuring crossover types and digital time alignment.
Adjusting sound effects and selecting speaker output configurations.
Information on connecting via lineout terminals and speaker leads.
Detailed settings for crossover frequencies, slopes, phase, and gain.
Selecting speaker sizes and configuring X-Over settings.
Configuring 3-way crossovers and digital time alignment settings.
Adjusting car type and rear speaker location for time alignment.
Calculating and setting distance and gain for digital time alignment.
How to identify zones for adjusting brightness and color.
Adjusting dimmer, brightness, text scroll, and preset illumination colors.
Storing custom day and night illumination colors, and enabling color guide.
Cleaning the unit, handling discs, and general playback information.
Details on playable/unplayable files, USB, and iPod/iPhone compatibility.
Links and resources for firmware updates and applications.
Details on iPod/iPhone, Android, Pandora, Spotify, and Bluetooth compatibility.
How to change the information displayed on the screen.
Table showing display information for different sources.
Troubleshooting common problems related to general function, radio, and media playback.
Solutions for common problems with CD, USB, and iPod playback.
Resolving issues with Android devices and the Pandora service.
Solutions for Spotify errors, Bluetooth connection, and sound quality problems.
Technical details for the radio tuner and CD player functionality.
Technical details for USB and Bluetooth connectivity features.
Technical specifications for auxiliary input, audio output, and general unit parameters.
Critical safety warnings and precautions before installing the unit.
List of installation parts and basic installation steps.
Guidance for in-dash mounting and installation in Toyota cars.
Detailed wiring instructions and diagram for connecting the unit.
How to connect external amplifiers via output terminals and crossover settings.
Explanation of the Class 1 laser marking and its safety.
General| CD-R playback | No |
|---|---|
| USB direct playback | Yes |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| USB version | 2.0 |
| Bluetooth version | 3.0+HS |
| USB port position | Front |
| Bluetooth profiles | A2DP, AVRCP, PBAP |
| Line outputs (RCA) | 2 |
| USB connector type | USB Type-A |
| USB ports quantity | 1 |
| DIN size | 2 DIN |
| Output power | - W |
| Product color | Black |
| Audio output channels | - channels |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 50 W |
| Display type | LCD |
| Display number of lines | 2 lines |
| AM band range | 531 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 24 |
| Package weight | 1800 g |
Weight and Dimensions| Depth | 111 mm |
|---|---|
| Width | 182 mm |
| Height | 158 mm |
| Weight | 1200 g |
To Next Page
