JVC KW-XG70HM - Advanced Settings; Scroll and Subwoofer Frequency Settings; External Input and Tag Display Settings; Amplifier Gain and IF Band Control

ENGLISH
25SETTINGS
Indication Item
( : Initial)
Setting, [reference page]
SCROLL *
2
Scroll
• ONCE
• AUTO
• OFF
: Scrolls the track information once.
: Repeats scrolling (at 5-second intervals).
: Cancels. (Holding DISP can scroll the display regardless of the setting.)
WOOFER
Subwoofer cutoff
frequency
• LOW
• MID
• HIGH
: Frequencies lower than 95 Hz are sent to the subwoofer.
: Frequencies lower than 140 Hz are sent to the subwoofer.
: Frequencies lower than 185 Hz are sent to the subwoofer.
EXT IN *
3
External input
• CHANGER
• EXT IN
: To use a JVC CD changer, [17], or an Apple iPod, [19].
: To use any other external component than the above, [20].
AUX ADJ
Auxiliary input
level adjustment
A.ADJ 00 —
A.ADJ 05
: Adjust the auxiliary input level accordingly, to avoid the sudden increase
of the output level when changing the source from external component
connected to the AUX input jack on the control panel.
TAG DISP
Tag display
• TAG ON
• TAG OFF
: Shows the tag while playing MP3/WMA/WAV tracks.
: Cancels.
AMP GAIN
Amplifier gain
control
• LOW PWR
• HIGH PWR
: VOL 00 – VOL 30 (Select if the maximum power of each speaker is less
than 50 W to prevent damaging the speaker.)
: VOL 00 – VOL 50
IF BAND
Intermediate
frequency band
• AUTO
• WIDE
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound quality
will not be degraded and the stereo effect will remain.
*
2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
3
Displayed only when one of the following sources is selected—FM, AM, CD, USB, Bluetooth, or AUX IN.
EN22-27_KW-XG70HM_f.indd 25EN22-27_KW-XG70HM_f.indd 25 8/5/09 4:54:48 PM8/5/09 4:54:48 PM