To Next PageTo Next PageWhy does my JVC Car Receiver generate noise?
Noise may occur if the current track is not in MP3/WMA format. Skip to another track or change the disc. Do not add the extension code or to non-MP3 or WMA tracks.
How to select AM on JVC KW-XR411 Car Receiver?
Check the = setting.
What to do if sound cannot be heard from JVC KW-XR411 speakers?
If you cannot hear sound from the speakers, first, adjust the volume to an audible level. Next, verify that the unit is not muted or paused. Finally, check the cords and connections to ensure they are properly connected.
Why is a longer readout time required on JVC KW-XR411?
A long readout time, indicated by a flashing “READING” message, is due to using too many hierarchical levels and folders. Reduce the number of hierarchical levels and folders.
How to select AUX IN on JVC Car Receiver?
Check the = setting.
What does “PLEASE” and “EJECT“ mean on my JVC KW-XR411?
When “PLEASE” and “EJECT” are alternately displayed, press the 0 button, then insert the disc correctly.
Why can't my JVC KW-XR411 Car Receiver play CD-R/CD-RW?
If your CD-R/CD-RW discs are not playing, it is likely that the CD-R/CD-RW has not been finalized. Insert a finalized CD-R/CD-RW. You can finalize the CD-R/CD-RW with the component used for recording.
Why is there static noise while listening to the radio on my JVC Car Receiver?
Static noise during radio playback indicates a loose aerial connection. Ensure the aerial is firmly connected to improve reception.
Why does my JVC KW-XR411 display “PROTECT”?
The “PROTECT” message appears because the terminals of the speaker leads are not properly covered with insulating tape. Ensure the terminals are correctly insulated and then reset the unit. If the issue persists, it is recommended to consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits.
Why does my JVC KW-XR411 Car Receiver not play tracks in the intended order?
The playback order is determined when the files are recorded.
General| MP3 playback | Yes |
|---|---|
| Tuner type | HS-IV |
| FM band range | 87.5 - 108 MHz |
| LW band range | 144 - 279 kHz |
| Preset stations quantity | 24 |
| Output power | 200 W |
| Product color | Black |
| Frequency range | 5 - 20000 Hz |
| Equalizer bands quantity | 3 |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| File type | MP3/WMA |
| Key illumination color | Blue |
| Illumination color | White |
Weight and Dimensions| Dimensions (WxDxH) | 188 x 22.5 x 116.8 mm |
|---|
Safety guidelines for Class 1 laser products, including handling and viewing precautions.
Advises on safe operation while driving and car environment considerations to prevent accidents.
Step-by-step instructions on how to reset the unit to its default settings.
Procedure to manually eject a disc when normal ejection fails.
Step-by-step guide to set the unit's clock time and format.
Explains the primary functions of buttons like SOURCE, Control dial, and EQ BASS-TRE.
Procedure for automatically storing up to 18 FM stations.
How to find stations based on program types using PTY codes.
How to enable temporary switching to Traffic Announcements from any source.
Steps to connect and play music files stored on a USB device.
Procedures for detaching a USB device without data loss or damage.
How to connect and play audio from external devices using the AUX input.
Explains the operations of each button on the remote control.
Configuring subwoofer cutoff frequency and output level.
Bit rates, sampling frequencies, and file formats for USB playback.
Solutions for no sound, "PROTECT" error, and unit not working.
Troubleshooting steps for selecting sources and static noise.
Solutions for discs not playing, ejecting, or skipping.
Troubleshooting for incorrect file formats, noise, and playback order.
Solutions for "NO FILE", "NOT SUPPORT", and incorrect character display.
Troubleshooting for "NO FILE", "NOT SUPPORT", "CANNOT PLAY", and sound interruptions.
