N
Nathan DonovanSep 3, 2025
Why the elapsed playing time is not correct on JVC Car Receiver?
- JJoseph WilsonSep 3, 2025
If the elapsed playing time on your JVC Car Receiver is incorrect, this is due to how the tracks are recorded on the disc.
To Next PageTo Next PageWhy the elapsed playing time is not correct on JVC Car Receiver?
If the elapsed playing time on your JVC Car Receiver is incorrect, this is due to how the tracks are recorded on the disc.
Why is JVC KW-XR616 disc sound sometimes interrupted?
If the sound from a disc is sometimes interrupted on your JVC Car Receiver, stop playback while driving on rough roads. Alternatively, try changing the disc or checking the cords and connections.
What to do if “PROTECT” appears on my JVC Car Receiver display?
If your JVC Car Receiver displays “PROTECT” and you cannot perform any operations, ensure the speaker lead terminals are properly covered with insulating tape. Then, reset the unit. If the issue persists, it is recommended to consult your JVC car audio dealer or a company supplying kits.
How to eliminate static noise on JVC Car Receiver radio?
If you are experiencing static noise while listening to the radio on your JVC Car Receiver, ensure the antenna is firmly connected.
What does “NO DISC” mean on my JVC KW-XR616 Car Receiver?
If your JVC Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
Why are the correct characters not displayed on my JVC KW-XR616's display?
If the correct characters are not displayed (e.g. album name) on your JVC Car Receiver, this unit can only display letters (upper case), numbers, and a limited number of symbols.
Why tracks/folders are not played in the order I intended on JVC Car Receiver?
If tracks/folders are not played back in the order you have intended on your JVC Car Receiver, the playback order is determined by the write-in time stamp. The first track/folder written into the USB device will be the first track/folder for playback.
What to do if JVC Car Receiver says “CANNOT PLAY” or “NO USB”?
If “CANNOT PLAY” flashes on the display, “NO USB” appears, or the unit cannot detect the USB device on your JVC Car Receiver, attach a USB device that contains tracks encoded in an appropriate format. Try reattaching the USB device again.
Why JVC KW-XR616 tracks do not play in the order I intended?
If tracks on your JVC Car Receiver do not play back in the order you intended, the playback order is determined when the files are recorded.
What does “PLEASE” and “EJECT” mean on my JVC KW-XR616 display?
If your JVC Car Receiver displays “PLEASE” and “EJECT“ alternately, press 0, then insert the disc correctly.
General| Bluetooth | Yes |
|---|---|
| Display Type | LCD |
| Sub Preamp Output | Yes |
| iPod Compatibility | Yes |
| HD Radio | No |
| Memory Card Slot | No |
| Navigation | No |
| Remote Control | Yes |
| Preamp Outputs | 3 Pairs |
| Compatible Formats | MP3, WMA, WAV |
| DIN Size | 2-DIN |
| RMS Power Output | 22 watts |
| Peak Output | 50 watts |
| RMS Power Output (CTA-2006) | 22 watts |
| Peak Output (CTA-2006) | 50 watts |
| Preamp Outputs (Channels) | 6 |
| Audio Input | Yes |
