2
IMPORTANT: A custom wiring harness (separately purchased) which is suitable for your car is
recommanded for connection between the unit and your car.
• Consult your JVC car audio dealer or a company supplying kits for details.
:
(
)
• JVC
Black /
Fuse block /
Ignition switch /
Blue (white stripe) /
(
)
Orange with white stripe /
Red /
Yellow /
*
3
To the metallic body or chassis of the car /
To an accessory terminal /
To a live terminal (constant 12 V) /
(
12 V)
To the automatic antenna if any (250 mA max.) /
( 250 mA)
To car light control switch /
White /
White (black stripe) /
(
)
Gray /
Gray (black stripe) /
(
)
Green /
Green (black stripe) /
(
)
Purple /
Purple (black stripe) /
(
)
Signal cord /
*
1
Signal cord /
*
1
Y-connector /
Y *
1
Y-connector /
Y *
1
Remote lead /
Remote lead /
To the blue (white stripe) lead
of the unit /
(
)
To the blue (white stripe) lead
of the unit /
(
)
Rear speakers or subwoofer (Make the <L/O MODE> setting accordingly,
see page 24 of the INSTRUCTIONS.) / (
<L/O MODE> 24 )
Front speakers /
Rear ground terminal /
15 A fuse /
15 A
Antenna input /
*
1
Not supplied for this unit.
*
2
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated
with paint.
*
3
Before checking the operation of this unit prior to installation, this lead must be connected; otherwise,
the power cannot be turned on.
*
4
To use these components, set the external input setting correctly (see page 25 of the INSTRUCTIONS).
Front speaker (left) /
()
Front speaker (right) /
()
Rear speaker (left) /
()
Rear speaker (right) /
()
ELECTRICAL CONNECTIONS /
Reset the unit. /
JVC Amplifier /
JVC
JVC Amplifier /
JVC
Connecting the external amplifier or subwoofer /
To the remote lead of other equipment (200 mA max.) /
( 200 mA)
Blue
/
*
1
*
2
—
*
3
*
4
( 25 )
Connecting the external components in series /
When connecting the external components, refer also to the manuals supplied for the components and adapter. /
You can connect the following components through the various JVC adapters to the expansion port. /
JVC
• Connection cords may need to be purchased separately. /
Component / Adapter / Model name /
Bluetooth device / Bluetooth Bluetooth adapter / Bluetooth
KS-BTA200
Portable audio player with line output jacks /
Line input adapter /
KS-U57
Portable audio player with 3.5 mm stereo mini jack /
3.5 .
AUX input adapter /
AUX
KS-U58
A KS-BTA200
B*
4
KS-U57 / KS-U58
To disconnect... /
...
Expansion port of the unit /
Steering wheel remote input /
Expansion port /
Caution / :
Before connecting the external components, make sure that the unit is turned off. /
D Power cord (supplied) / (
)
Install_KW-XR616_010A_f.indd 2Install_KW-XR616_010A_f.indd 2 2/1/10 11:46:17 AM2/1/10 11:46:17 AM
To Previous Page
Loading...
Need help?
General
