EasyManua.ls Logo

JVC KW-XR616 - Troubleshooting - USB and Bluetooth Connectivity Issues; USB Device Detection and Sound Interruption Problems; Bluetooth Connection and Audio Quality Problems

JVC KW-XR616
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34 ENGLISH
Symptom Remedy/Cause
USB device playback
“CANNOT PLAY” flashes on the
display.
“NO USB” appears on the display.
The unit cannot detect the USB
device.
Attach a USB device that contains tracks encoded
in an appropriate format.
Reattach the USB device again.
While playing a track, sound is
sometimes interrupted.
The MP3/WMA tracks have not been properly
copied into the USB device.
Copy MP3/WMA tracks again into the USB device,
and try again.
Correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols. (
9)
Bluetooth *
2
Bluetooth device does not detect
the unit.
The unit can be connected with one Bluetooth
mobile phone and one Bluetooth audio device at a
time.
While connecting a device, this unit cannot be
detected from another device. Disconnect currently
connected device and search again.
The unit does not detect the
Bluetooth device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to
connect the device. (
13)
The unit does not make pairing
with the Bluetooth device.
Enter the same PIN code for both the unit and
target device.
Select the device name from “SPECIAL,” then try to
connect again. (
14)
Try to pair/connect from the Bluetooth device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to a place where you can get a better
signal reception.
The connected audio device
cannot be controlled.
Check whether the connected audio device supports
AVRCP (Audio/Video Remote Control Profile).
The sound is interrupted or
skipped during playback of a
Bluetooth audio device.
Reduce the distance between the unit and the
Bluetooth audio device.
Disconnect the device connected for “BT-PHONE.”
Turn off, then turn on the unit.
Connect the Bluetooth audio device again, when
the sound is not yet restored.
*
2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
EN28-37_KW-XR616_001A_f.indd 34EN28-37_KW-XR616_001A_f.indd 34 1/18/10 11:11:46 AM1/18/10 11:11:46 AM

Other manuals for JVC KW-XR616

Related product manuals