EasyManua.ls Logo

JVC KW-XR811

JVC KW-XR811
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29ENGLISH
Category
Menu item Selectable setting, [ Initial: Underlined ]
Color Setup
Ring Color *
2
On
Off
: When a call comes in, the display will flash in blue.
The display will change to the original color when
the call is answered or the incoming call stops.
When the unit receives a SMS, the display only
illuminate in blue.
: Cancels.
Audio
Fad/Bal *
3,
*
4
Fader/balance
R6 – F6, [ 0 ]
L6 – R6, [ 0 ]
: Fad (fader): Press
5
/
to adjust the front and rear
speaker output balance.
: Bal (balance): Press
4
/
¢
to adjust the
left and right speaker output balance.
Loud
Loudness
Loud 1/2/3
Off
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
: Cancels.
Volume
Adjust
Level –5 —
Level +5,
[ Level 0 ]
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.
Before making an adjustment, select the source you
want to adjust.
“FIX” appears on the display if “FM” is selected as the
source.
Subwoofer LPF
Level
Phase
: Turn the control dial to select the cutoff frequency
to the subwoofer.
Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies
higher than 55 Hz/85 Hz/120 Hz are cut off.
: Turn the control dial to adjust the subwoofer
output level. Level 00 to Level 08 [ Level 04 ]
: Turn the control dial to select the subwoofer phase.
0deg (normal) or 180deg (reverse)
HPF
High Pass
Filter
Select the cutoff frequency to the front/rear speakers. Set this to
match the LPF settings.
62Hz/95Hz/
135Hz
Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are cut
off.
: All signals are sent to the front/rear speakers.
*
2
Displayed only when USB Bluetooth adapter, KS-UBT1 is connected.
*
3
If you are using a two-speaker system, set the fader level to <0>.
*
4
This adjustment will not affect the subwoofer output.
EN22-31_KW-XR811_003A_2.indd 29EN22-31_KW-XR811_003A_2.indd 29 2/1/10 2:47:25 PM2/1/10 2:47:25 PM

Other manuals for JVC KW-XR811

Related product manuals