EasyManua.ls Logo

JVC KW-XR811 - Setting Dimmer Time; Configuring Dimmer Start and End Times; Additional Unit Information; Basic Operation and Menu Timeout

JVC KW-XR811
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35ENGLISH
1
2
]
<Display>
]
<Dimmer>
]
<Time Set>
Setting the time for dimmer
You can set the start/end time for dimmer.
[Hold]
3
]
Adjust the dimmer start time.
4
]
Adjust the dimmer end time.
5
]
Exit from the setting.
More about this unit
Basic operations
General
If you turn off the power while listening to
a track, playback will start from where it had
been stopped previously next time you turn
on the power.
If no operation is done for about 60 seconds
after pressing
MENU
button, the operation will
be canceled.
Tuner operations
Storing stations in memory
During SSM search...
All previously stored stations are erased and
the stations are stored anew.
When SSM is over, the station stored in the
lowest preset number will be automatically
tuned in.
When storing a station manually, the
previously preset station is erased when
a new station is stored in the same preset
number.
FM Radio Data System operations
Network-Tracking Reception requires two
types of Radio Data System signals—PI
(Programme Identification) and AF
(Alternative Frequency) to work correctly.
If a Traffic Announcement is received by
TA Standby Reception, the volume level
automatically changes to the preset level
(TA Volume) if the current level is lower than
the preset level.
When Alternative Frequency Reception is
activated (with AF selected), Network-Tracking
Reception is also activated automatically.
EN32-41_KW-XR811_003A_2.indd 35EN32-41_KW-XR811_003A_2.indd 35 1/26/10 10:29:53 AM1/26/10 10:29:53 AM

Other manuals for JVC KW-XR811

Related product manuals