What to do if my JVC LT-24HG35E LED TV has no picture and no sound?
If your JVC LED TV has no picture and no sound, ensure the set is switched on and properly connected to the mains power outlet. Select the appropriate input mode. If the issue persists, unplug the unit for 1 minute, then plug it back in.
What to do if my JVC LT-24HG35E has no colour or picture is black?
If your JVC LED TV has no colour or the picture is black, check that the SCART input is set to Auto.
What to do if my JVC LT-24HG35E LED TV has no reception?
If your JVC LED TV has no reception, ensure you have tuned in the TV stations and press 1 on the remote control. Also, connect the antenna and make sure the TV is ON and not in Standby mode.
Why does my JVC LT-24HG35E switch off with missing antenna input signal?
It is normal for your JVC LED TV to switch off if the antenna signal is missing. The set will automatically change to standby mode 15 minutes after the antenna signal has disappeared.
How to fix blocky image on JVC LT-24HG35E?
To fix a blocky image or intermittent image stops on your JVC LED TV: * Check all antenna connections. * Move the antenna away from areas of possible interference. * Try using an antenna booster.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1366 x 768 pixels |
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Tuner | DVB-T/T2/C/S/S2 |
| Aspect Ratio | 16:9 |
| Refresh Rate | 50 Hz |
| Backlight Type | LED |
Guidance on safely disposing of used batteries in the EU.
Critical warning against placing open flames near the TV.
Instructions for cleaning the LCD screen safely and effectively.
Connecting an antenna for analogue and digital TV reception.
Description of various ports like HDMI, SCART, USB, and audio outputs.
Details on power connection and wall mounting bracket holes.
Guide to language, country, power off, and connection type settings.
Process for automatically scanning for digital and analogue TV channels.
Step-by-step guide for manually searching digital channels.
Step-by-step guide for manually searching analogue channels.
How to set up and use the parental lock feature.
Table showing resolution compatibility for different broadcast types.
How to cycle through and select picture aspect ratios.
Setting preferred languages, subtitles, audio, and hearing impaired options.
How to connect a USB stick and open the Media Browser.
Connecting a PC and selecting PC input mode.
Connecting HDMI or DVI devices to the TV.
Connecting satellite receivers or DVD players via SCART.
A table listing common symptoms and their possible solutions.
Details on system, video, LCD, HDMI, and audio specifications.
To Next Page
