Press “MENU” button to enter OSD menu.
Press
“
”
to select the OPTION menu.
Press
“ ”
to select the item you want to adjust.
Press
“
”
to change the status.
Press “MENU” button to exit.
Operations
(Control with HDMI) adjustment
Press
“
”
to select On or Off. Select On to start the function of HDMI CEC. (available
only in HDMI mode)
(Power off Link) adjustment
The item is selectable only when Control with HDMI item is On.
Press
“
”
to select on or off. If you select On, you can turn off the operating device by
turn off the TV.
Note:
In the following cases, please turn off this item once, and turn it on again.
1.When HDMI equipment corresponding to the CEC function was connected newly.
2.When the connected HDMI input terminal was changed.
To Next Page
Loading...
