JVC LT-32DZ1 - Page 28

English English
22
English English
5
4
Repeat step 1 and 2
Press
“ ”
button to select items and
press
“ ”
button to adjust it.
(Picture Mode) adjustment
Press “
” to switch picture mode
between: Standard
、
Mid
、
User
、
Dynamic.
(Contrast) adjustment
Press “
” to adjust the contrast of the
picture from 0 to 100.
(Brightness) adjustment
Press “ ” to adjust the brightness of
the picture from 0 to 100.
(Color) adjustment
Press “ ” to adjust the color
saturation from 0 to100. Adjust this
setting until the colors on the screen
look natural.
(Sharpness) adjustment
Press “
” to adjust the sharpness
levels on your screen from 0 to100.
(Tint) adjustment
Press “ ” to adjust the tint of the
picture from 0 to100.(NTSC ONLY)
(Color Temperature)adjustment
Press “
” to select among medium
Medium
、
Warm
、
Cool.
(Aspect Ratio)adjustment
Press “ ” to select the ratio of
the screen
：
16:9
、
4:3
、
Auto
、
Panoramic
、
Zoom1
、
Zoom2
、
Full
Native.
(Noise Reduction)adjustment
Press “
” to adjust the noise
reduction levels among Auto
、
Off
、
Weak
、
Middle
、
Strong.
Press “MENU” button to exit.
The OSD menu picture will be concealed
automatically after 1 minute.
Press
“
”
to select (Screen) item. (Only
available in PC-RGB mode)
2
Press “ ” to enter the submenu.
Adjust the screen ow below:
Auto Adjust: Adjust picture to ll screen automatically.
Horizontal Pos.: Adjust the horizontal position of
picture from 0 to 100.
Vertical Pos.: Adjust the vertical position of picture
from 0 to 100.
Size: Adjust the frequency of picture from 0 to 100.
Phase: Adjust the phase of picture from 0 to 100.