38
Initial Setup
This function automatically shuts off your TV when there is no signal from the channel the
TV is on for 10 minutes.
Press the MENU button
π†
To "Initial Setup"
è
To enter
π†
To "Auto Shut Off"
è
To turn "On" or "Off"
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text “No
Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.
Auto Shut Off
Initial Setup
Auto Shut Off
Software Version
Power Indicator
Quick Start-up
Select Operate
BACK MENU
Back Exit
On
Low
On
2/2
You can confirm the Software Version.
Press the MENU button
π†
To "Initial Setup"
è
To enter
π†
To "Software Version"
è
To enter
Press the OK button to close
Press the M
ENU button when finished
Software Version
Initial Setup
Auto Shut Off
Software Version
Power Indicator
Quick Start-up
Select Operate
BACK MENU
Back Exit
On
Low
On
2/2
Power indicator allows you to adjust the brightness of the power indicator
Press the MENU button
π†
To "Initial Setup"
è
To enter
π†
To "Power Indicator"
è
To turn "High", "Low", "Off"
Press the MENU button when finished
Notes :
• When Off is selected :
The LED disappears if you have a TV signal.
The LED is lit as “Low” when there is no TV signal.
• When the On Timer turns On, the LED is lit as "Low" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
Power Indicator
Initial Setup
Auto Shut Off
Software Version
Power Indicator
Quick Start-up
Select Operate
BACK MENU
Back Exit
On
Low
On
Previous
2/2
LCT2224-001B-A English.indd 38LCT2224-001B-A English.indd 38 2/15/07 11:05:05 AM2/15/07 11:05:05 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
