JVC LT-42E55W - Connecting an AV Device Using a Component (Ypbpr) Cable

15
3
Connections
GB
Connecting an AV Device Using a Component (YPbPr) Cable
1. Connect the supplied component adapter cable and a
component cable from the TV’s YPbPr input sockets to
an external AV device’s component output sockets.
2. Use an AV cable to connect the TV’s Audio in (L/R)
input sockets to the external AV device’s component
audio output sockets. (Audio Left = white, and Audio
Right = red)
Component port on the TV Y Pb Pr
Video output ports on DVD
player
Y Pb Pr
Y Cb Cr
3. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
which is located at the front right side under the
frame.
4. Press the
button at the front right side under the
frame or on the remote control to turn on your TV.
5. Press the
button at the front right side under the
frame or the INPUT button on the remote control to
display the Source List. Use the
buttons to select
YPbPr and then press the OK button to confirm.
USB
5V 500mA
HDMI2(ARC)
HDMI1
RF
COMMON INTERFACE (CI)
HEADPHONE YPbPr
HDMI3Digital Audio Output
(Optical)
RLVIDEO
Audio in
Audio in
L
R
COMPONENT
OUT
Y
Pr
Pb
AV Cable
(not included)
Yellow (Video) Red (R) White (L)
Yellow (Video) Red (R) White (L)
Component Cable
(not included)
Pb/Cb
Pr/Cr
Y
Pb/Cb Pr/Cr Y
Component
Adapter
Cable
(included)
Blue (Pb/Cb) Red (Pr/Cr) Green (Y)
Rear Bottom View of TV
Video Camera
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Analogue Game
Console
Satellite Receiver
Satellite
antenna
cable
Rear Right Side View of TV