English - 7 -
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
mains.
Note: The position of the power cord inlet may dier depending
on the model.
To switch on the TV from standby
standby mode the standby LED lights
Press the Standby button on the remote control.
To switch the TV into standby
control button. Press and hold the Standby button on
the remote control.
the screen. Highlight OKOK button. The
cord from the mains socket.
Quick Standby Mode
either;
Press the Standby button on the remote.
mode.
not a malfunction, it meets the requirements for energy
TV Control & Operation
The control button allows you to control the Quick
Note: The position of the control button may dier depending
on the model.
Press the control
switched into standby mode via control button.
To turn on the TV:
will turn on.
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
Operation with the Remote Control
Press the Menu button on your remote control to
Press Home
OK to make selections in order to make changes,
Back/Return to return to the
Input Selection
Once you have connected external systems to your
Source button on your remote control consecutively
OK
mode. Or enter the Inputs menu on the Home Screen,
OK.
Changing Channels and Volume
Volume
+/-
by using the Programme +/- buttons on the remote.
To Next Page
Loading...
