JVC Model HR-DVS1U - Set Cable Box Output Channel & Cable Box Brand

16 EN
INITIAL SETTINGS (cont.)
Set Cable Box Output
Channel & Cable Box Brand
TURN ON CABLE BOX
1
Select a channel other than channel 9 on your cable
box.
TURN ON THE VCR
2
Press POWER.
ACCESS MAIN MENU
SCREEN
3
Press MENU.
ACCESS INITIAL SET SCREEN
4
Press CH5∞ or %fi to move the highlight bar (arrow)
to “INITIAL SET”, then press OK or # .
ACCESS CABLE BOX SET
SCREEN
5
Press CH5∞ or %fi to
move the highlight bar
(arrow) to “CABLE BOX
SET”, then press OK or # .
SELECT CABLE BOX
OUTPUT CHANNEL
6
Your selection depends on
how your cable box is
connected to your VCR.
If your cable box is
connected to your VCR
using an RF connection . . .
. . . press CH 5∞ or %fi
until the channel number
representing the cable
box’s output (CH2 – CH9) appears on the screen.
If your cable box is connected to your VCR’s REAR
AUDIO/VIDEO IN connectors . . .
. . . press CH 5∞ or %fi until "ON L-1 (REAR)" appears
on the screen.
CABLE BOX SET
OFF
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
123
456
7
89
0
2
4
1
3
T W
DV VHS
POWER
Turn on the TV and select the AV mode.
POWER
CH
MENU
OK
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
=CABLE BOX SET
DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END