JVC Model HR-DVS1U - Access Guide Channel Set Screen; Input Guide Channel Number; Input Receiving Channel Number

EN 43
ACCESS GUIDE CHANNEL
SET SCREEN
4
Press CH5∞ or %fi to
move the highlight bar
(arrow) to “GUIDE
CHANNEL SET”, then
press OK or # .
INPUT GUIDE CHANNEL
NUMBER
5
Press CH5∞, %fi or the
appropriate NUMBER keys
to input the VCR Plus+
Guide Channel number as
shown in the TV listing.
Then press OK or # .
● If you receive your
channels with a cable
box and if you have
properly set your
Controller, “CABLE CH”
appears in place of
“VCR CH”. If not, refer to pages 15 – 17 and re-
perform the procedure.
INPUT RECEIVING CHANNEL
NUMBER
6
Press CH5∞, %fi or the
appropriate NUMBER keys
to input the number of the
channel on which the
Guide Channel’s broad-
casts are received. Then
press OK or # .
● Repeat steps 5 and 6 for
each instance.
RETURN TO NORMAL
SCREEN
7
Press MENU.
(Ex.) When inputting the
Guide Channel number
6 for WNJU(Ind.)
(Ex.) If WNJU(Ind.) is
received on channel 47
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : – – –
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
GUIDE CHANNEL SET
=
GUIDE CH : 6
VCR CH : 47
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
=GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
123
456
7
89
0
2
4
1
3
T W
DV VHS
CH
NUMBER
MENU
OK