16
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the units, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
1. Press the SOURCE button to select the Bluetooth® mode. The display will show “BT“, and
then “BT PAIRING”.
2. Activate your Bluetooth® device and select the search mode. “MX-D719PB” will appear
on your Bluetooth® device list.
3. Select “MX-D719PB” and enter “0000” for the password if necessary. After the
connection, the display will show “BT” and the unit will make a beep sound.
4. To disconnect the Bluetooth® function,
• Switch to another function on the unit or disable the function from your Bluetooth®
device. The unit will make a beep sound.
• Press and hold
Bluetooth button.
The unit will make a beep sound twice and then the display will show “BT PAIRING“.
If your Bluetooth
® device supports A2DP, play music via your device.
• To pause / resume playback, press
.
• To skip to a track, press
or .
• Turn the MASTER –VOLUME+ dial to increase or decrease the volume.
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.
MX-D719PB_IB_Final190704V2.indd 16 05/07/2019 09:48
To Next Page
Loading...
