JVC NX-F3B

(No.MB662<Rev.003>)1-25
4.6 OTHER FUNCTION
4.6.1 SUMMARY
It memorize why it was performed between things of STANDBY by POWER ON of the last and receive TEST MODE
[POWER] + [STOP] + [3] and plan improvement of the hardware examination efficiency in what I display.
4.6.2 MEMORY AND INDICATION
The memory of the SAFETY item which IT detected assumes it a chisel for once of the last.
It dose not have it as a history.
The memory assumes it STANDBY memory / INH memory.
SECTION 5
TROUBLESHOOTING
This service manual does not describe TROUBLESHOOTING.
COLD SET (initial value)
POWER key of remote controller
POWER key of main body
SLEEP TIMER
STANDBY request by CEC
At SAFETY
*
= 0
*
= 2
*
= 3
*
= 5
*
= 8
*
=
-
SAFETY ERROR number
Not SAFETY ERROR (Normal)
= port number
=
--
Value of SAFETY ERROR port (AD)
Value of SAFETY ERROR port (STATIC)
Not SAFETY ERROR (Normal)
* * = AD value
* * = H or L
* * =
--
* *
SYSTEM STATUS MODE
FL indication
S D. : @ @ :