(No.MB662<Rev.003>)1-3
Subwoofer
Designs and specifications are subject to change without notice.
NX-F3A/UB
Main unit
Type Bass reflex type
Speaker driver 16 cm cone
Power handling capacity 150 W
Impedance 6 Ω
Frequency range 30 Hz - 200 Hz
Sound pressure level 76 dB/W•m
Dimensions (W x H x D) 300 mm x 301 mm x 305 mm
Mass 8.2 kg
Tuner
FM frequency 87.50 MHz - 108.00 MHz
AM frequency 531 kHz - 1 710 kHz (9 kHz spacing)
530 kHz - 1 710 kHz (10 kHz spacing)
Terminal (front of the main unit)
USB digital input terminal x 1
Audio output headphone terminal x 1
Impedance 16 Ω - 1 kΩ
Terminal (rear of the main unit)
Audio
output speaker
terminals x 1
Left/Right speakers Output power 200 W (50 W x 4) at 3 Ω (1 kHz/10 % THD)
Impedance 3 Ω - 16 Ω
Subwoofer Output power 150 W at 6 Ω (100 Hz/10 % THD)
Impedance 6 Ω - 16 Ω
Optical digital input terminal x 1 -23 dBm to -15 dBm
Optical digital output terminal x 1 -23 dBm to -15 dBm
Component video output terminals x 1 Y 1.0 Vp-p, 75 Ω terminated
PB 0.7 Vp-p, 75 Ω terminated
PR 0.7 Vp-p, 75 Ω terminated
Composite video output terminal x 1 1.0 Vp-p, 75 Ω terminated
Audio input terminals x 1 500 mV/47 kΩ
HDMI monitor output terminal x 1
FM antenna terminal x 1
AM antenna terminal x 1
General
Power source (Australia) AC 240 V~, 50 Hz
Power source (Hong Kong) AC 220 V~, 50 Hz
Power consumption (in operation) 90 W
Power consumption (on standby) 0.8 W
Dimensions (W x H x D) [including projecting parts] 300 mm x 95 mm x 295 mm
Mass 3.4 kg
To Next Page
Loading...
