(No.MB662<Rev.003>)1-5
Speaker (SP-NXF3F)
Subwoofer (SP-NXF3W)
Designs and specifications are subject to change without notice.
Component video output terminals x 1 Y 1.0 Vp-p, 75 Ω terminated
PB 0.7 Vp-p, 75 Ω terminated
PR 0.7 Vp-p, 75 Ω terminated
Composite video output terminal x 1 1.0 Vp-p, 75 Ω terminated
Audio input terminals x 1 500 mV/47 kΩ
HDMI monitor output terminal x 1
FM antenna terminal x 1
AM antenna terminal x 1
General
Power source (Thailand) AC 220 V~, 50 Hz
Power source (other countries/areas) AC 110 - 127/220 -240 V~,50/60 Hz
Power consumption (in operation) 90 W
Power consumption (on standby) 0.8 W
Dimensions (W x H x D) [including projecting parts] 300 mm x 95 mm x 295 mm
Mass 3.4 kg
USB (Compatible with USB 2.0 Full-Speed)
Compatible device USB mass storage class device
Compatible file system FAT16, FAT32
Output power DC 5 V=500 mA
HDMI
Output power DC 5 V=55 mA
Type 1-way bass reflex type Magnetically shielded type
Speaker driver Front ch 5.5 cm cone
Surround ch 5.5 cm cone
Power handling capacity Front ch 50W
Surround ch 50W
Impedance 3 Ω
Frequency range 80 Hz - 20 kHz
Sound pressure level 77 dB/W•m
Dimensions (W x H x D) [including projection parts] 88 mm x 184 mm x 125 mm
Mass (1 speaker) 1.2 kg
Type Bass reflex type
Speaker driver 16 cm cone
Power handling capacity 150 W
Impedance 6 Ω
Frequency range 30 Hz - 200 Hz
Sound pressure level 76 dB/W•m
Dimensions (W x H x D) 300 mm x 301 mm x 305 mm
Mass 8.2 kg
To Next Page
Loading...
