14
To move to the next or previous page of the
current menu:
Moves to the next page.
Moves to the previous page.
To return to the previous menu:
(while holding...)
To cancel PBC, press 7, then select a track by using the
number buttons (see page 10). Playback starts with the
selected track.
To reactivate PBC, press 7 (twice if Resume is turned
on), then press DVD/CD 6.
To search for a track/group by name
You can search for a track or group in the USB device
connected to the USB 2 terminal by title and start
playback.
1 Before starting playback, activate Title
Search.
TR SEARCH
Search for a track by title.
GR SEARCH
Search for a group by title.
2 Confirm the mode selection.
A
3 Enter the title.
• You can enter up to 5 characters of the title.
• To enter the title, see “How to enter titles” on
page 33.
4 Start the Title Search.
“SEARCH...” appears on the
display while searching.
When a track or group is found, playback starts.
• When no track or group is found, “SEARCH
END” appears on the display.
To search for next group or track:
To search for next track: To stop Title Search:
Playing Back a Digital Audio Player
• For connecting a digital audio player, see page 7.
You can listen to the digital audio player connected to
the AUDIO IN jack.
• Make sure to turn down the volume on the System to
minimum level before starting playback.
To adjust the audio input level
If the sound from the device connected to the AUDIO
IN jack is too loud or too quiet, you can preset the
audio input level through the AUDIO IN jack (without
changing the volume level).
While “AUDIO IN” is selected as the source...
AUDIO LVL1 AUDIO LVL2
AUDIO LVL3
• As the number of the level increases, the preset input
level is increased.
TR SEARCH GR SEARCH
Canceled
text_EN_NXG9G5.indb 14text_EN_NXG9G5.indb 14 08.8.5 10:52:10 AM08.8.5 10:52:10 AM
To Next Page
Loading...
