16
4 Memorize the measurements.
Each time you hear a test tone, press the button.
You hear 5 test tones from the speakers.
5 Select a preset number from 1 to 3 to store
the equalization pattern.
After finishing the measurement, an appropriate
equalization pattern is created and it is shown in
white on the TV screen.
3
EXIT
1
2
PRESET
MY SOUND
SELECT PRESET 1 TO 3 AND PRESS
THE ENTER KEY TO STORE.
On the TV
• The last equalization pattern stored into the
selected preset number is shown in green.
• To return to the measurement, select “EXIT” on
the TV screen then press ENTER/SET.
6 Store the equalization pattern.
• To store other equalization patterns, press the
button again and repeat steps 3 to 6.
To exit MY SOUND setup
Creating a Soothing Tone for
Your Ear—MY SOUND
For “DVD/CD” and “USB1”:
The sound tone you can hear is different in individuals.
MY SOUND creates an appropriate equalization
pattern for your listening condition.
To set up MY SOUND
1 Select “DVD/CD” or “USB1” as the source.
2 Enter MY SOUND setup.
MY SOUND
SELECT START AND PRESS THE ENTER KEY
TO START MEASUREMENT.
START EXIT
On the TV
“MY SOUND” and “MEASURE” appear alternately
on the display.
3 Start the measurement.
A test tone comes out of the speakers.
On the TV
MY SOUND
MEASURING... DATA 1 2 3 4 5
PRESS THE ENTER KEY IMMEDIATELY
AFTER YOU HEAR THE TEST TONE.
ENTER EXIT
Signal level
text_EN_NXG9G5.indb 16text_EN_NXG9G5.indb 16 08.8.5 10:52:13 AM08.8.5 10:52:13 AM
To Next Page
Loading...
