JVC NX-G5 - Creating Your Own Sound Modes; User Mode

18
5 Finish the adjustment.
6 Select one of the User Modes to store your
setting into.
USER 1
USER 2
USER 3
7 Store the setting.
MEMORY
• You can adjust the SEA pattern temporarily by doing
the operation on steps 1 to 4. The adjustment is
cleared when you change the sound mode to another
mode.
Creating Your Own Sound Modes
—User Mode
You can adjust the preset Sound Modes to create your
own Sound Modes which suit your taste. The changed
settings can be stored as the USER1, USER2 and
USER3 Modes.
1 Select one of the preset Sound Modes.
• To create your own Sound Mode with surround
effect, select DANCE, HALL or STADIUM.
2 Start editing the selected Sound Mode.
3 Select the SEA parameter you want to
adjust.
BASS
TRE
BASS
To adjust the bass sound.
TRE
To adjust the treble sound.
4 Adjust the parameter.
BASS +2
• You can adjust the bass and treble level from –4
to +4.
• Repeat steps 3 and 4 to adjust the other
parameters.
text_EN_NXG9G5.indb 18text_EN_NXG9G5.indb 18 08.8.5 10:52:15 AM08.8.5 10:52:15 AM