JVC NX-G5 - Playing Back a Digital Audio Player

14
Playing Back a Digital Audio Player
• For connecting a digital audio player, see page 7.
You can listen to the digital audio player connected to
the AUDIO IN jack.
• Make sure to turn down the volume on the System to
minimum level before starting playback.
To adjust the audio input level
If the sound from the device connected to the AUDIO
IN jack is too loud or too quiet, you can preset the
audio input level through the AUDIO IN jack (without
changing the volume level).
While “AUDIO IN” is selected as the source...
AUDIO LVL1 AUDIO LVL2
AUDIO LVL3
• As the number of the level increases, the preset input
level is increased.
For SVCD/VCD with PBC:
While playing a disc with PBC, “PBC” appears on the
display.
When disc menu appears on the TV, select an item on
the menu. Playback of the selected item starts.
• To select a number, see “How
to select a number” on page
10.
To move to the next or previous page of the
current menu:
Moves to the next page.
Moves to the previous page.
To return to the previous menu:
(while holding...)
To cancel PBC, press 7, then select a track by using the
number buttons (see page 10). Playback starts with the
selected track.
To reactivate PBC, press 7 (twice if Resume is turned
on), then press DVD/CD 6.
text_EN_NXG7G3.indb 14text_EN_NXG7G3.indb 14 08.7.14 11:41:46 AM08.7.14 11:41:46 AM