21
• To exit from Timer setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
2
Select Timer you want to set.
3
Select Timer type.
WEEKLY: See step 4 below.
ONCE: Timer works once on a selected day of the week.
4
Select the desired day of the week.
• When “WEEKLY” is selected in step 3:
SUN DAY to SAT DAY: Timer works every week on the selected day.
MON-FRI: Timer works from Monday to Friday every week.
MON-SAT: Timer works from Monday to Saturday every week.
EVERYDAY: Timer works everyday.
• When “ONCE” is selected in step 3:
5
1 Adjust the hour then the minute for the on-time.
2 Select the playback source—“iPod A,” “iPod B,” “FM” or “AUDIO IN.”
• When “FM” is selected, select the preset number of the station you want to
listen to.
When you select “FM
– – ” the preset station you last tuned in is set. (See
“Listening to FM Broadcasts” on page 17.)
3 Select the volume level.
“SET OK” appears followed by the setting information, then the icon
and the timer number indicator (1/2/3) light up on the display.
6
Turn off the unit (on standby).
TIMER 2TIMER 1
TIMER 3
ONCEWEEKLY
MON-FRI
EVERYDAY
MON DAY
SUN DAY
TUE DAY
WED DAY
THU DAY FRI DAY
SAT DAY
Back to the beginningMON-SAT
TUE DAYMONDAY WEDDAY
THU DAY SAT DAYFRI DAY
Back to the beginning
SUN DAY
NX-PN10[J].BOOK Page 21 Thursday, April 9, 2009 8:55 AM
To Next Page
Loading...
Need help?
General
