JVC PC-5 L - Usage and Installation; Speaker Section Mounting; Handle and Rear Cover Mounting

Pc-5 L/LB |
Various Usage
Installation of Speaker Sections
Removing and Mounting of Speaker Joint Fixtures
1.
Align
®
with
and
slide
the
speaker
box
down
to
secure
it
at
part
©
as
illustrated.
2.
Join
the
other
speaker
in
the
same
manner
as
above.
3.
For
removal
of
the
speaker
joint
fixture,
remove
the
screws
with
a
screwdriver.
4.
For
mounting
the
speaker
joint
fixture,
perform
the
reverse
procedure
of
item
3.
Center
control
section
Speaker joint fixtures
(Slider)
Fig. 3
Mounting the Handle
1. Push the handle grip lock up, in the direction of arrow
2. Pressing mark 4 in the direction of arrow @ , secure
the handle grip to the slot indicated by arrow @)
3. Push the hand grip lock down to close it.
Close the other hand grip lock in the same manner.
Fig. 4
Mounting of Rear Cover
Rear cover
mounting hole
Rear cover
Fig. 5
No. 1443