_ e - o _ j X m o o-
Once you have adjusted the DAP modes, the adjustment is
memorized fbr each DAP mode.
Before you start, remembel:..
• Make sure that you have set the speaker information correctly
(see page 12).
• There is a time limit in doing the fbllowing steps. If the setting is
canceled betbre you finish, start fi'Oln step 1 again.
• You cannot adjust the rear speaker output level when you have set
"REAR SPK" to "NO." See page 12.
On the front panM:
1. Press DSP MODE repeatedly until DSPMODE
the DAP mode -- LIVE CLUB,
DANCE CLUB, HALL, or
"%/
PAVILION -- appears on the
display.
The DSP indicator also lights up on the display.
2. Adjust the rear speaker output levels.
1) Press ADJUST repeatedly until one of
2)
3)
the following indications appears on
the displa):
"REAR L LEVEL":
To adjust the left rear speaker leveh
"REAR R LEVEL":
To adjust the right rear speaker level.
Press CONTROL UP A/DOWN V to
ADJUST
CONTROL
DOWN UP
adjust the selected speaker output level • II • I[
(from +10 dB to -1O dB).
Repeat 1) and 2) to adjust the other "_\ >
speaker output level.
3. Adjust the effect level.
1) Press ADJUST repeatedly until "DSP ADJUST
EFFECT" appears on the display.
The display changes to show the cun'ent
L!
setting.
2) Press CONTROL UP A/DOWN V to CONTROL
DOWN UP
select the effect level. _
• Each time you press the button, the li • II _._\
effect level changes as fbllows:
%>
F DSP EFFECT1-- DSPEFFECT2 -- DSP EFFECT3"7
J
--DSPEFFECT5---"-- DSP EFFECT4 ÷--
As the number increases, the selected DAP mode becomes
stronger (normally set it to "DSP EFFECT 3").
From the pemot;e contpoL"
1. Press SURROUND MODE
repeatedly until the DAP mode --
LIVE CLUB, DANCE CLUB,
HALL, or PAVILION -- appears
on the display.
The DSP indicator also lights up on the
display.
2. Press SOUND. SouND
The 10 keys are activated for sound
adjustments.
</
3. - REAR'L +
Adjust the rear speaker output
levels.
• To adjust the left rear speaker level, press
REAR,L +/ (fi'om +10 dB to 10 dB).
• To adjust the right rear speaker level, press
REAR,R +_ (fi'om +10 dB to 10 dB).
4. Press EFFECT to select an effect EFFECT
level you want. _"->
%/
• Each time you press the buttom the effect
lexel changes as fbllows:
E DSP EFFECT1 -- DSP EFFECT2 -- DSPEFFECT3 -]
J
-- DSPEFFECT5-- DSPEFFECT4 -_--
As the number increases, the selected DAP mode becomes
stronger (normally set it to "DSP EFFECT 3").
23