JVC RX-6010VBK Instructions

. e - NO m o o -
You can use only one DSP mode at a time. When a DSP mode is
actix ated, another DSP mode is canceled if in use.
For Ooibv Pro Logic, Ooib V Digital, and D'I_
Digital Surround
On the front panel:
1. Press SURROUND ON/OFE
• Each time you press the 1outrun,the Dolb_
DTS Surround mode turns on and off
alternately.
SURROUND ON/OFF
.
Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with r'IOEDOLBVSURROUNO_mark.
• To enjoy Dolby Digitai, piay back a software encoded with
Dolby Digital and labeled with DD_ mark.
• To enjoy DTS Digital Sun'ound, piay back a software encoded
with DTS Digital Surround and labeled with _ mark.
To
Press SURROUND ONOFF again.
("SURROUND OFF" appears on the display.)
cancel the Dolbv/DTS SuPr'ound mode
SURROUND ON/OFF
From the remote control:
1. Press SURROUND.
• Each time you press the button,
the DolbyiDTS Surround mode turns on
and off alternately.
• You can also turn on DolbyiDTS Sun'ound
mode by pressing SURROUND MODE.
.
Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with DDEooLBvsuRRouNo_mark.
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with DD_ mark.
• To enjoy DTS Digital sun'ound, play back a software encoded
with DTS Digital Surround and labeled with _ mark.
To cancel the Dolbv/DTS SuPPound mode
Press SURROUND again. ("SURROUND OFF"
appears on the display.)
For the ocher DSP modes
On the front panel:
1. Press DSP MODE repeatedly until DSPMODE
the mode you want appears on the
display.
• Each time yon press the button, the DSP
modes change. (See page 20 for more
details.)
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Sun'ound and labeled with DDIDOLaYSURROUND]mark.
To cancel the DSP mode
appearsPressDSPonMODEthedisplay.repeatedly until "DSP OFF" ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
From the remote ¢ontroh
1. Press SURROUND MODE
repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP
modes change.
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Surround and labeled with DDloo_vso,,o0_o] mm'k.
To cancel the DSP made
Press SURROUND MODE repeatedly until
"DSP OFF" appears on the display.
24

JVC RX-6010VBK Specifications

General

Brand	JVC
Model	RX-6010VBK
Category	Receiver
Language	English