To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-664VBK and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| HDMI Inputs | 4 |
| Audio Formats Supported | Dolby Digital, DTS |
| FM Tuner | Yes |
| Weight | 7.2 kg |
| Tuning range | FM: 87.5 - 108 MHz |
| Frequency response | 10 Hz - 100 kHz |
| Total harmonic distortion | 0.08% |
| Input sensitivity (MM) | 2.5 mV |
| Input sensitivity (line) | 200 mV |
| Signal to noise ratio (MM) | 80 dB |
| Output (line) | 200 mV |
| Total Harmonic Distortion (1kHz) | 0.08% |
| Video Connections | composite, component |
| Speaker load impedance | 6 ohms |
| Signal-to-Noise Ratio | 100 dB |
| Speaker Impedance | 6 ohms |
Essential warnings and cautions regarding electrical shock, fire, and safe operation of the appliance.
Guidelines for installation, location, handling, and checking supplied accessories.
How to turn the receiver on/off and select the audio/video source.
Adjusting volume levels and selecting front speaker sets.
Adjusting front speaker output balance and enabling the loudness function.
Reproducing surround sound with two front speakers using 3D-PHONIC technology.
Utilizing DAP modes for simulating concert hall or club acoustics.
Using Dolby Pro Logic, Dolby 3ch Logic, and JVC Theater Surround for enhanced audio.
Steps to set up and memorize surround mode adjustments for future use.
Activating and adjusting various surround modes like PROLOGIC, THEATER, and 3CHLOGIC.
Steps to activate and adjust the DVD MULTI playback mode for analog discrete output.
Details on what the limited warranty covers, what is excluded, and warranty service procedures.
