18
When the shut-off time comes
The receiver turns off automatically.
To check or change the time remaining until the shut-off time
1. Press SETTING, if necessary, so that the Control % / fi / @ / # buttons work for
setting the Sleep Timer.
2. Press Control % / fi, if necessary, until “SLEEP” appears on the display.
3. Press Control @ / #.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press Control @ / # repeatedly.
To cancel the Sleep Timer
Press Control @ / # repeatedly in step 3 above until “0” appears on the display. (The
SLEEP indicator goes off.)
Turning off the power also cancels the Sleep Timer.
From the remote control:
Press SLEEP repeatedly.
The SLEEP indicator lights up and the shut-off time
appears on the display.
Each time you press the button, the shut-off time on the
display changes as follows:
To check or change the time remaining until the shut-off time
Press SLEEP once. The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press SLEEP repeatedly.
To cancel the Sleep Timer
Press SLEEP repeatedly until “0” appears on the display. (The SLEEP indicator goes
off.)
Turning off the power also cancels the Sleep Timer.
(Canceled)
2010 30 40 50 60 70 80
0
SLEEP
RX-664VBK(J)_0119-001B_En.01-23 98.1.6, 11:27 AM18
To Next Page
Loading...
Need help?
General
