EasyManua.ls Logo

JVC RX-7022VSL - Specifications

JVC RX-7022VSL
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Specifications
Designs & specifications are subject to change without notice.
Amplifier
Output Power
At Stereo operation:
Front channels: 100 W per channel, min. RMS, Both channels driven into 8 at
1 kHz, with no more than 0.9% total harmonic distortion.
At Surround operation:
Front channels: 100 W per channel, min. RMS, driven into 8 at 1 kHz, with no
more than 0.8% total harmonic distortion.
Center channel: 100 W, min. RMS, driven into 8 at 1 kHz, with no more than
0.8% total harmonic distortion.
Rear channels: 100 W per channel, min. RMS, driven into 8 at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz): PHONO (MM): 2.7 mV/47 k
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
220 mV/47 k
Audio Input (DIGITAL IN)* : Coaxial: DIGITAL 1 (DVD): 0.5 V (p-p)/75
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
21 dBm to 15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level: TAPE/CDR, VCR: 220 mV
Digital output: Optical: DIGITAL OUTPUT
Signal wave length: 660 nm
Output level: 21 dBm to 15 dBm
Signal-to-Noise Ratio (66 IHF/DIN): PHONO (MM): 70 dB/ 66 dB (at REC OUT)
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
87 dB/67 dB
Frequency Response (8 ): PHONO (MM): 20 Hz to 20 kHz (±1 dB)
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization: ±1 dB(20 Hz to 20 kHz)
Bass boost: +3 dB ±1 dB at 100 Hz
Tone Control: Bass (100 Hz): ±10 dB
Treble (10 kHz): ±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video: DVD, VCR, DBS: 1 V(p-p)/75
S-video: DVD, VCR, DBS: (Y: luminance): 1 V(p-p)/75
(C: chrominance, burst): 0.286 V(p-p)/75
Component video: DVD, DBS: (Y: luminance): 1 V(p-p)/75
(P
B/CB, PR/CR): 0.7 V(p-p)/75
Video Output Level/Impedance:
Composite video: VCR, MONITOR OUT: 1 V(p-p)/75
S-video: VCR, MONITOR OUT: (Y: luminance): 1 V(p-p)/75
(C: chrominance, burst): 0.286 V(p-p)/75
Component video: MONITOR OUT: (Y: luminance): 1 V(p-p)/75
(PB/CB, PR/CR): 1 V(p-p)/75
Synchronization: Negative
Signal-to-Noise Ratio: 45 dB
EN30-42.RX-7020V[A]3 02.4.17, 5:17 PM41

Table of Contents

Related product manuals