JVC RX-884RBK

50
English
For Dolby Surround Pro Logic:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output level. **
“REAR L LEVEL”: Adjust the left rear speaker output level. *
“REAR R LEVEL”: Adjust the right rear speaker output level. *
“CENTER TONE”: Select the center tone level. **
For Dolby Digital:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output level. **
“REAR L LEVEL”: Adjust the left rear speaker output level. *
“REAR R LEVEL”: Adjust the right rear speaker output level. *
“CENTER TONE”: Select the center tone level. **
For Theater Surround and Digital Theater Surround:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output level. **
“REAR L LEVEL”: Adjust the left rear speaker output level. *
“REAR R LEVEL”: Adjust the right rear speaker output level. *
“CENTER TONE”: Select the center tone level. **
“DSP EFFECT”: Select the effect level.*
7. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
Selecting Your Favorite SEA Mode (Also see page 32)
1. Press any button of ON SCREEN CONTROL % / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL % / fi to move to “SOUND CONTROL,”
then press @ / #.
The SOUND CONTROL menu appears.
3. Press ON SCREEN CONTROL % / fi to move to “SEA,” then press @ / #.
The SEA menu appears.
4. Press ON SCREEN CONTROL % / fi to move to “SEA MODE.”
5. Press ON SCREEN CONTROL @ / # to select the SEA mode you want.
6. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
Example:
SURROUND LEVEL menu
for Theater Surround
SURROUND LEVEL
:OPERATE
TEST TONE : OFF
CENTER LEVEL: 0
dB
REAR L LEVEL: 0 dB
REAR R LEVEL: 0 dB 
CENTER TONE : FLAT
DSP EFFECT : 3
SEA menu
SOUND CONTROL menu
MAIN MENU
MAIN MENU
SOURCE :VCR1
VISUAL :VCR1

MODE :OFF

SOUND CONTROL
TUNER CONTROL
SETTING 


VOLUME : 20
:ENTER
**
**
**
**
**
**
SEA
SEA MODE :ROCK
SEA ADJUST










:OPERATE
**
**
100 10kHz1k
SOUND CONTROL
SURROUND LEVEL
SEA

BAL.:CNTR
LOUDNESS : OFF
INPUT ATT : NORMAL
SUBWFR LEVEL: 0
dB 

NEXT PAGE
:ENTER
****
****

Notes:
* Not displayed when “REAR
SPK” is set to “NONE” (see
page 20).
**Not displayed when
“CENTER SPK” is set to
“NONE” (see page 20).
EN47_62.RX-884R[E]/1.PM5 98.3.26, 1:03 PM50