JVC SP-AD85-A

24
Connection
Using the AUX Connection
Use the supplied
3.5 mm to 3.5 mm
stereo audio cable
to connect the
headphone socket of
an audio device and
the Aux in socket of
the unit.
The unit will switch into AUX IN mode after you
start playback from the connected audio device.
After there is no input signal for about 10 seconds, the
unit will switch back into Bluetooth® mode automatically.
O/P: 5V 2.1A
I/P: 5V 1A
3.5mm to 3.5mm stereo
audio cable (included)
SP-AD85-x_IB_Final191104V3.indd 24 04/11/2019 15:18