19
Playing back sources from external devices
1 Press [TUNER/AUDIO IN] repeat-
edly to select “AUDIO IN” in the
display window.
2 Start playback on the connected
device.
3 Adjust the volume or the sound
settings for your preference.
• Refer to page 13.
NOTE
• Before connecting or disconnecting an external
device, press [VOLUME ] repeatedly to set the
volume of this system to the minimum. You can
also use the [VOL –] control on the main unit.
You can select the gain of the signal from the
[AUDIO IN] terminal.
Press [DVD/AUDIO IN LEVEL] while
holding down [SHIFT].
• Each time you press [DVD/AUDIO IN LEVEL],
the signal gain setting toggles between “NOR-
MAL” and “HIGH” in the display window.
• Select “NORMAL” for normal operation.
Playing back sources from
external devices
Selecting the signal gain
Playing back sources from external devices
UX-GN9V[A]-06.fm Page 19 Friday, February 6, 2009 11:46 AM
To Next Page
Loading...
