21
Basic operations of disc/file playback
This part explains how to play back 1) files
recorded on the loaded disc, and 2) files recorded
on a USB mass storage class device (hereinafter
referred to as “USB device”) connected to the main
unit. The operations are explained with a display of
MP3 files as an example.
NOTE
• Also refer to “Notes on files recorded on a con-
nected USB device” on page 62.
• When files of different types (audio/still picture/
video) are recorded on a loaded disc or USB
device connected to the [USB1 VIDEO/AUDIO
PLAY] terminal, select the file type before play-
back. (Refer to “Selecting the file type” on page
20.)
1
(To play back files on a disc)
Place a disc on the disc tray.
• Refer to steps 1 and 2 on page 20.
(To play back files on a USB device)
Connect the USB device.
NOTE
• To play back a still picture file or video file, con-
nect the USB device to the [USB1 VIDEO/
AUDIO PLAY] terminal. An audio file can be
played back when the USB device is connected
to either the [USB1 VIDEO/AUDIO PLAY] termi-
nal or the [USB2 AUDIO/REC PLAY] terminal.
• You cannot connect a computer to the [USB1
VIDEO/AUDIO PLAY] or [USB2 AUDIO/REC
PLAY] terminal of the system.
• You cannot connect a JVC Everio camcorder to
the [USB1 VIDEO/AUDIO PLAY] or [USB2
AUDIO/REC PLAY] terminal of the system.
• When connecting with a USB cable, use the
USB 2.0 cable whose length is less than 1 m.
• Before connecting or disconnecting a USB
device, press [VOLUME ] repeatedly to set the
volume of this system to the minimum. You can
also use the [VOL –] control on the main unit.
2
(To play back files on a disc)
Press [DVD/CD 6].
(To play back files on a USB device)
Press [USB1 6] or [USB2 6].
Playing back a file
Flash memory device, portable
digital audio player or other
USB device
Main unit (front view)
or
Basic operations of disc/file playback (continued)
UX-GN9V[A]-06.fm Page 21 Friday, February 6, 2009 3:23 PM
To Next Page
Loading...
